- Wider range of voltages for electrical connection
- PTC heating element with dynamic response behaviour
- Compact dimensions, example application: camera heater
- High heating output per volume
The small and flat enclosure heater provides the best protection against condensation in small control cabinets, enclosures and installation spaces. The PTC heating element transmits its heat onto an anodised aluminium profile. The compact contact heater is designed for long-term use.
Operating voltage | AC/DC 120-240 V¹ (min. 110 V, max. 265 V) |
---|---|
Heating element | PTC resistor - temperature limiting |
Heater body | aluminium, anodised |
Connection | 2 x AWG 20 stranded wire, 300 mm (±8) |
Mounting | screw fixing |
Fitting position | variable |
Operating temperature | VDE: -45 to +70 °C (-49 to +158 °F) UL: -45 to +40 °C (-49 to +104 °F) |
Storage temperature | -45 to +70 °C (-49 to +158 °F) |
Operating/Storage humidity | max. 90% RH (non-condensing) |
Protection type/Protection class | IP40 / II (double insulated) |
Approvals | VDE, UL File No. E234324 (according to UL 508A, NITW File on request), EAC |
Note | other voltages on request |
¹ Operating with voltages below 140V AC/DC reduces heating performance by approx. 10%.
Art. No. | Heating capacity² | Inrush current max. | Recommended pre-fuse T (time-delay) | Surface temperature (approx.) | Weight (approx.) |
---|---|---|---|---|---|
01651.0-00 | 8W | 2.0 A | 2.0 A | +150 °C | 20 g |
01662.0-00 | 10W | 2.5 A | 4.0 A | +155 °C | 20 g |
01673.0-00 | 13W | 3.0 A | 4.0 A | +170 °C | 20 g |
² at +20°C (+68°F) ambient temperature
Technical Drawing
- www.stego.ru>
- Products>
- Heating>
- Heaters>
- RC 016 | 8 W to 13 W