- Adjustable positioning without tools
- High switching capacity
- Strain relief
- Different cladding diameters
- Suitable for lamp LED 025
The door switch monitors the position of cabinet doors and is available in three versions. For example, it can be used for switching a light when opening a door (NC), or to activate a fan when closing a door (NO). The version with change-over contact (CO) can be used as a normally closed and/or normally open contact. The wide mechanical adjustment range of the door switch DS 013 offers versatile application areas: the housing is adjustable within a 35 mm range, while the screw flange with a slotted hole offers an additional 21 mm. The switching travel of the switch itself is another 8 mm.
| Max. switching capacity | 250VAC, 8 (1.5) A |
|---|---|
| Service life | VDE: > 10,000 cycles |
| UL: > 6,000 cycles | |
| Connection | 4-pole clamp with strain relief, clamping torque 0.5Nm max. |
| Mounting | screw fixing (M5) |
| Casing | plastic according to UL94 V-0, grey/black |
| Dimensions | 87 x 64 x 30mm |
| Weight | approx. 50g |
| Fitting position | variable |
| Operating/Storage temperature | -20 to +85°C (-4 to +185°F) |
| Operating/Storage humidity | max. 90% RH (non-condensing) |
| Protection type | IP20 |
| Approvals | VDE, EAC; UL intended |
| Art. No. | Model | Suitable wire |
|---|---|---|
| 01350.0-00 | change-over (CO) | Cable round, stranded wire (with wire end ferrule) 0.75mm² to 1mm² |
| 01351.0-00 | normally closed (NC) | Cable round, stranded wire (with wire end ferrule) 0.75mm² to 1.5mm² |
| 01352.0-00 | normally open (NO) | Cable round, stranded wire (with wire end ferrule) 0.75mm² to 1.5mm² |
Technical Drawing
- www.stego.ru>
- Products>
- Accessories>
- Miscellaneous>
- DS 013 | Door Switch
