- Clip fixing and pressure clamp for quick mounting
- Low surface temperature
- Earthed plastic casing
- Wide voltage range
- Safe and stable performance under stressful conditions
- Shock and vibration proof
Compact heater for the protection of electrical and electronic components in enclosures. Its design ensures good self-convection, effecting in high warm air flow. A touch-safe plastic cover provides for low surface temperatures on the side of the device. The practical push-in clamping terminal enables quick and easy electrical connection. The heaters are designed for continuous operation.
| Operating voltage | 120 - 240V AC/DC¹ (min. 110V, max. 265V) |
|---|---|
| Heating element | PTC resistor - temperature limiting |
| Surface temperature | < +80°C (+176°F), except upper protective grille |
| Connection | 2 x pressure clamps for stranded wire 0.5 - 1.5 mm² |
| (with wire end ferule) and rigid wire 0.5 – 2.5 mm² | |
| Casing | plastic according to UL94 V-0, black and white |
| Dimensions | 105 x 38 x 99 mm |
| Mounting | clip for 35mm DIN rail, EN 60715 |
| Fitting position | vertical airflow (air outlet up, connection on bottom) |
| Operating/Storage temperature | -45°C to +70°C (-49°F to +158°F) |
| Operating/Storage humidity | max. 90% RH (non-condensing) |
| Protection type/Protection class | IP20 / II (double insulated) |
| Approvals | VDE, UL File No. E234324, EAC |
| DIN EN 60068-2-27:2010-02 & DIN EN 60068-2:64:2009-04 | |
| in connection with DIN EN IEC 61373:2011-04, Cat. 1 B | |
| Note | other voltages on request |
| Art. No. | Heating capacity1 | Inrush current max. | Recommended pre-fuse T (time-delay) | Weight (approx.) |
|---|---|---|---|---|
| 06401.0-00 | 20 W | 2.0 A | 4.0 A | 0.2 kg |
| 06402.0-00 | 30 W | 2.0 A | 4.0 A | 0.2 kg |
| 06403.0-00 | 40 W | 4.0 A | 6.0 A | 0.2 kg |
1 at +20°C (+68°F) ambient temperature
Technical drawing
- www.stego.ru>
- Products>
- Heating>
- Heaters>
- LTS 064 | 20 W to 40 W
