- Clip fixing and pressure clamp for quick mounting
- Low surface temperature
- Earthed plastic casing
- Wide voltage range
- Safe and stable performance under stressful conditions
- Shock and vibration proof
Compact heater for the protection of electrical and electronic components in enclosures. Its design ensures great convection resulting in excellent heat dissipation. A touch-safe plastic cover provides for low surface temperatures on the side of the device. The practical push-in clamping terminal enables quick and easy electrical connection. The heaters are designed for continuous operation. The heater is also available in a version with thermostat (LTF 065 series).
| Operating voltage | 120 - 240V AC/DC (min. 110V, max. 265V) |
|---|---|
| Heating element | PTC resistor - temperature limiting |
| Surface temperature | < +80°C (+176°F), except upper protective grille |
| Connection | 2 x pressure clamps for stranded wire 0.5 - 1.5 mm² (with wire end ferule) and rigid wire 0.5 – 2.5 mm² |
| Casing | plastic according to UL94 V-0, black and white |
| Mounting | clip for 35mm DIN rail, EN 60715 |
| Fitting position | vertical airflow (air outlet up, connection on bottom) |
| Operating/Storage temperature | -45 to +70°C (-49 to +158°F) |
| Operating/Storage humidity | max. 90% RH (non-condensing) |
| Protection type/Protection class | IP20 / II (double insulated) |
| Approvals | VDE, EAC, UL File No. E234324 |
| Note | other voltages on request |
| Art. No. | Heating capacity1 | Inrush current (max.) | Recommended pre-fuse T (time-delay) | Length (L) | Weight (approx.) |
|---|---|---|---|---|---|
| 06500.0-00 | 50 W | 4.0 A | 6.0 A | 101 mm | 0.4 kg |
| 06503.0-00 | 100 W | 6.0 A | 8.0 A | 161 mm | 0.75 kg |
| 06504.0-00 | 150 W | 8.0 A | 10.0 A | 161 mm | 0.75 kg |
¹ measured at +20 °C (+68 °F) ambient temperature
Technical drawing
- www.stego.ru>
- Products>
- Heating>
- Heaters>
- LT 065 | 50 W to 150 W
